| Specifications — VersaTools® MDA Series |
|
| Video |
| Gain |
Unity |
| Bandwidth |
|
| MDA 3SV/3SVA/3SV Dual, MDA 5SV |
270 MHz (-3 dB) |
| MDA 3V/3AV/3V Dual, MDA 5V |
435 MHz (-3 dB) |
|
| Video input |
| Number/signal type |
|
| MDA 3SV/3SVA, MDA 5SV |
1 S-video |
| MDA 3SV Dual |
2 S-video |
| MDA 3V/3AV, MDA 5V |
1 composite video |
| MDA 3V Dual |
2 composite video |
| Connectors |
|
| MDA 3SV/3SVA, MDA 5SV |
(1) 4-pin mini DIN female |
| MDA 3SV Dual |
(2) 4-pin mini DIN female |
| MDA 3V/3AV, MDA 5V |
1 BNC female |
| MDA 3V Dual |
2 BNC female |
| Nominal level |
1 Vp-p for Y of S-video and for composite video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels |
0.4 V to 2.0 Vp-p for composite video or Y of S-video with no offset |
| Impedance |
75 ohms |
| Return loss |
|
| MDA 3SV/3SVA, MDA 5SV, |
|
| MDA 3SV Dual |
<-25 dB @ 0 to 10 MHz |
| All other models |
<-27 dB @ 5 MHz |
| DC offset (max. allowable) |
5.0 V |
| Input coupling |
AC |
|
| Video output |
| Number/signal type |
|
| MDA 3SV/3SVA |
3 buffered S-video |
| MDA 3SV Dual |
2 x 3 buffered S-video |
| MDA 5SV |
6 S-video: 5 buffered for distribution, 1 passive loop-through
|
| MDA 3V/3AV |
3 buffered composite video |
| MDA 3V Dual |
2 x 3 buffered composite video |
| MDA 5V |
6 composite video: 5 buffered for distribution, 1 passive loop-through |
| Connectors |
|
| MDA 3SV/3SVA |
(3) 4-pin mini DIN female |
| MDA 3SV Dual |
(6) 4-pin mini DIN female |
| MDA 5SV |
(6) 4-pin mini DIN female |
| MDA 3V/3AV |
3 BNC female |
| MDA 3V Dual |
6 BNC female |
| MDA 5V |
6 BNC female |
| Nominal level |
1 Vp-p for Y of S-video and for composite video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels |
0.4 V to 2.0 Vp-p, follows input |
| Impedance |
75 ohms |
| Return loss |
<-30 dB @ 5 MHz |
| DC offset |
±50 mV with input at 0 offset |
|
| Sync |
| Standards |
NTSC 3.58, NTSC 4.43, PAL, SECAM |
|
| Audio — MDA 3AV, MDA 3SVA, MDA 3A/3A RCA, MDA 5A RCA |
| Gain |
|
| DIP switch set to match output type |
Unity (0 dB) |
| DIP switch not matched to output type |
|
| Frequency response |
20 Hz to 20 kHz, ±0.05 dB |
| THD + Noise |
0.03% @ 1 kHz at nominal level |
| S/N |
|
| MDA 3A/5A RCA |
>90 dB, unbalanced, at maximum output |
| All other models w/audio |
|
| |
>90 dB, balanced at maximum output |
| Stereo channel separation |
>80 dB @ 1 kHz; >60 dB @ 20 kHz |
| CMRR |
>75 dB @ 20 Hz to 20 kHz |
|
| Audio input — MDA 3AV, MDA 3SVA, MDA 3A/3A RCA, MDA 5A RCA |
| Number/signal type |
|
| MDA 3A RCA, MDA 5A RCA |
1 stereo unbalanced |
| MDA 3AV, MDA 3SVA, MDA 3A |
1 stereo balanced/unbalanced |
| Connectors |
|
| MDA 3A RCA, MDA 5A RCA |
2 RCA connectors |
| MDA 3AV, MDA 3SVA, MDA 3A |
(1) 3.5 mm captive screw connector, 5 pole |
| Impedance |
|
| MDA 3A RCA, MDA 5A RCA |
>10k ohms unbalanced, DC coupled |
| MDA 3AV, MDA 3SVA, MDA 3A |
>50k ohms unbalanced, >25k ohms balanced, DC coupled |
| Nominal level |
+4 dBu (1.23V), 0 dBu (0.775 V), -10 dBV (316 mV), -20 dBV (100 mV) compatible |
| Maximum level |
|
| MDA 3A/5A RCA |
+17 dBu (unbalanced) at 1%THD+N |
| All other models w/audio |
|
| |
+24 dBu (balanced) at 1%THD+N |
| NOTE |
|
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu | |
|
| Audio output — MDA 3AV, MDA 3SVA, MDA 3A/3A RCA, MDA 5A RCA |
| Number/signal type |
|
| MDA 5A RCA |
5 stereo, unbalanced |
| MDA 3A RCA |
3 stereo, unbalanced |
| MDA 3AV, MDA 3SVA, MDA 3A |
3 stereo, balanced/unbalanced |
| Connectors |
|
| MDA 5A RCA |
10 RCA connectors |
| MDA 3A RCA |
6 RCA connectors |
| MDA 3AV, MDA 3SVA, MDA 3A |
(3) 3.5 mm captive screw connectors, 5 pole |
| Impedance |
|
| MDA 3A RCA, MDA 5A RCA |
50 ohms unbalanced |
| MDA 3AV, MDA 3SVA, MDA 3A |
50 ohms unbalanced, 100 ohms balanced |
| Gain error |
±0.1 dB channel to channel |
| Maximum level (Hi-Z) |
|
| MDA 3A/5A RCA |
+15 dBV, unbalanced, at 1%THD+N |
| All other models w/audio |
|
| |
>+24 dBu, balanced at 1%THD+N |
| Maximum level (600 ohm) |
|
| MDA 3A/5A RCA |
>+14 dBm, unbalanced, at 1%THD+N |
| All other models w/audio |
|
| |
>+15 dBm, balanced or unbalanced, at 1%THD+N |
|
| General |
| External power supply |
100 VAC to 240 VAC, 50/60 Hz, 5 watts, external, autoswitchable; to 12 VDC,
1 A (max.), regulated |
| Power input requirements |
|
| MDA 3V/3SV/5V/5SV |
12 VDC, 0.1 A (max.) |
| MDA 3AV/3SVA |
12 VDC, 0.3 A (max.) |
| All other models |
12 VDC, 0.2 A (max.) |
| Temperature/humidity |
Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Rack mount |
Yes, with optional 1U rack shelf, part #60-190-01, or 60-604-01;
or the VersaTools® rack shelf, part #60-190-20, or 60-604-20 |
| |
Also furniture mountable with optional under desk mount kit,
#70-212-01, or attachable to a projector mount with optional PMK 100 projector mount kit #70-217-01 |
| Enclosure type |
Metal |
| Enclosure dimensions |
1.7" H x 4.3" W x 3.0" D (1U high, quarter rack wide)
4.2 cm H x 11.0 cm W x 7.6 cm D
(Depth excludes connectors and knobs.) |
| Product weight |
|
| MDA 3V, MDA 3SVA |
0.4 lbs (0.2 kg) |
| MDA 3V Dual |
0.7 lbs (0.3 kg) |
| MDA 3AV |
0.6 lbs (0.3 kg) |
| MDA 5V, MDA 5SV |
0.5 lbs (0.2 kg) |
| MDA 3SV |
0.4 lbs (0.2 kg) |
| MDA 3SV Dual, MDA 3A |
0.5 lbs (0.2 kg) |
| MDA 3A/5A RCA |
0.4 lbs (0.2 kg) |
| Shipping weight |
|
| MDA 3V, MDA 3V Dual |
3 lbs (2 kg) |
| MDA 3AV, MDA 5V |
3 lbs (2 kg) |
| MDA 3SV, MDA 3SV Dual |
2 lbs (1 kg) |
| MDA 3SVA, MDA 5SV |
2 lbs (1 kg) |
| MDA 3A/5A RCA |
2 lbs (1 kg) |
| Vibration |
ISTA 1A in carton (International Safe Transit Association) |
| Listings |
UL, CUL |
| Compliances |
CE, FCC Class A, VCCI, AS/NZS, ICES |
| MTBF |
30,000 hours |
| Warranty |
3 years parts and labor |
| NOTE |
|
All nominal levels are at ±10%. | |
| NOTE |
|
Specifications are subject to change without notice. | |
